How to inflate a lighter

1.Choose a special high-purity butane gas tank of the inflatable lighter, the inflatable environment also needs to be ventilated, and no Mars can be inflatable around.

2.Check the appearance of the lighter is damaged, gap, if there is a small amount of gas in the lighter must be released, you can find a small hammer, vertically press the lighter air inlet, operate several times, the gas is released until the end.

3.Before inflation, the flame of the lighter should be adjusted to the lowest level, this step is to prevent the careless press of the lighter switch during the inflation process, the fire is also the smallest, to ensure safety.

4. After the flame is adjusted to the lowest level, cover the lid of the lighter. If the lighter without the lid is inflated, be sure not to touch the switch, turn the lighter over, and the charging hole is facing up.

5. Hold the lighter in one hand and the gas bottle in the other, align the outlet of the gas bottle with the gas intake of the lighter and press down vertically to inflate, keep the inflation for 2-3 seconds each time, and repeat 3-4 times to ensure sufficient gas.

6.After the completion of inflation, let it rest for 3-4 minutes before ignition, turn the flame adjusting rod after standing, adjust the flame height and turn the lighter before use.

7.The fire trial, if the flame is too big or too small is just adjusted is not accurate enough, then you need to adjust the flame adjustment rod until the appropriate size, so that the inflation is completed.